Create screen '0100'  with the following elements (see screen shots below for layout, size, pos etc.):

1.       Screen type: Normal

2.       Short description: Initial screen

3.       Right click on the following file and select 'Save Target As', now save file to PC

4.       Now use the upload facility within the screen layout (screen painter) to upload this
file (Utilities-> Upload/download->Upload).

5.       This should now have created all the required screen elements and its layout info,
otherwise you will need to create them manually following steps 6 to 11

Should not need doing but manual creation steps are as follows:

6.       Custom control container, named CC_USERLIST (large left)

7.       Custom control container, named CC_TALKINGTO (top right)

8.       Custom control container, named CC_CONVERSATION (bottom right)

9.       Pushbutton BUT_SEND with function code 'BSEND'

10.    The customary OK code field called OK_CODE
                  Note: The names of the elements should be exactly as described above

11.    Add the following flow logic code (note modules already created in includes):

PROCESS BEFORE OUTPUT.
 MODULE STATUS_0100_USERLIST.
 MODULE STATUS_0100_TALK.

PROCESS AFTER INPUT.
 MODULE USER_COMMAND_0100.